TD530XA/601XB 01-36 02.8.26 11:44 AM Page 15
SET UP FOR USE
You can program the tuner to scan all the channels you receive in your area.
NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just
select the TV/DVD/VHS channel selector to the output channel of the cable box or satellite box (Ex CH3).
Then select the channel to be viewed on the Cable Box or Satellite Box.
Phg r, Ih,eTViDVI!I,'VHS _o_÷,' cord
Plug the TV/DVD/VHS power cord
into a standard AC outlet.

NOTE:

• If some digits appear in the corner of
the screen, press the POWER button
without unplugging the power cord.
2Turn or_th,÷ TViDVI!},'VHS
Press the POWEP, bntton to turn on the TV/DVD/VHS.
3S÷llect ' II!!NGI!.I!SI_I'' o,' I!_:SRAI)OL"o,'
H_AHgAHS [" ..... 1
Select "ENGLISH" or .......
[[NGLISt_] £SP FRA
"ESPANOL"=Spanish or
"FRAN(_AIS" =French using file ...........
Arrow _ or _1 button. "[ ]" indi-
cate the selected language.
,4 IBegi_ auto Usrese_ SaTUP
Press the Arrow • or • button to LANGU,_GE
point to "AUTO PRESET". L_.] ......
Then press the Arrow I_ button. _ ..........
The tuner scans and memorizes all
active channels in your area.
NOTES:
• The TV/DVD/VHS distinguishes between standard
TV channels and cable channels.
• If you want to play or record a video tape
BEFORE presetting the tuner, you must press the
SETUP button on the remote control. To preset the
tuner again, see "CHANNEL SET UP AGAIN" on
page 16.
• The TV/DVD/VHS may memorize TV channels as
CATV channels if reception conditions is poor. If
this happens, try AUTO MEMO action again when
reception conditions are better.
_" Alto, sea,w, rli9
The tuner stops on the lowest memorized channel
If you want to recall the selected channels, you can
select the desired channel directly with the remote
control number buttons or CHANNEL • or •.
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
Selecl OI/ANNIEL SET UP'
Press the SETUP button on the
remote control.
Press the Arrow • or • button to
point to "CHANNEL SET UP".
Then, press the Arrow I_ button.
TVNCR S£TUP 1
TIME_ pROGraMmING
S£TTINGCLOCK
CH_NN£L S_T U_'
US£rVS S£T UP
VCHIPS£_ UP
ZlRO RE_Ur_N
2c_elec_ ADD, DELETE ,---CIq
_' I]% C_ANNEL SET Up
Press the Arrow • or • button to _ooo=_F=o_
,_UTOpReSeT
point to "ADD/DELETE CH".
Press flae Arrow _ button.
3IEnier tile desired cl_sl]r_el rl_uml!'}elr
Press the Arrow • or • button until
your desired channel number
appears. (You can also use the num- 0_
bet buttons or the CHANNEL •/• .........
button to enter it) (Example: CH8)
,4 I!}elete {or add) ii firom (i,'_to} memory
Press the Arrow _ or _1 button. The channel number
changes to light red. The channel is deleted from
memory.
• To delete another channel, repeat steps [3] and [4].
• If you press the Arrow I_ or _1 button again, the
channel is memorized again.
5I!!xiiIbe cI_at',,sel sn_p mode
Added channel: Light blue.
Deleted channel: Light red.
Press the SETUP button on the remote control to
returns to TV mode.
NOTE: To confirm that channel(s) has been deleted
or added, press the CHANNEL • or • button.
- 15 - EN
IC29