Sylvania SRCD223, SRCD227 owner manual Pile the Shaiich HcgOIlIIEbutton liree, Rires be Play button

TD530XA/601XB 36-55 02.8.26 11:48 AM Page 41

You can define the part to be called back.

Pile_ the SHAII_CH HcgOIlIIEbutton _li_ree

In'_esdurng _ Iisybaek

Set the marker

•Using the cursor ("9/1_) button, position the cursor on to the marker number shown as "NOT SET". Press the ENTER button when the screen to be

reviewed appears. The maned time will be displayed. Up to 5 points can be marked.

Call back the marker

•Using the cursor ("9/_) button, position the cursor on to the marker number to be called back and press the ENTER button.

Clear the marker

•Using the cursor ("9/_) button, position the cursor on to the marker number to be cleared and press the CLEAR button.

To clem" all markers, place the cursor on "AC" (All clear markers) and press the ENTER button.

2II_neSs_he Sll AIl_OIq I_gOI!)ll!!Iba_Oli'Oil _'ue B ]URN button to ex_ _'_edispHay.

P_ess llPo 11710©Ebutor in stop f '_ode+

• The program screen will appear.

2 PlIII Ive l"_Umel'ioblttOlSS _o el'_er_'_e

• 50	programs		can be	displayed		at	.................		1
once	on	the	screen+	Press	"V"	to	, 0s , =	0 0
go	to the	next page.					I,_=,	.....

3Rires be PLAY button.

•Playback will start in the programmed order:

•While the program is being played back, the STOP button works as follows.

•Press the STOP button once and then the PLAY

button again, playback will restart from the point

where the STOP button was pressed. (Program continued)

•Press the STOP button twice and then the PLAY but- ton again, playback will restart from the track in the usual way. (Program cleared)

Notes

• Adding programs is not possible during program playback. You must stop the cm'rent playback before such operations can be carried out.

•Press the CLEAR button to cancel a program. The most recently entered program will then be deleted.

•Up to 99 programs can be entered.

•Playback from a desired track and random playback are not available during program playback.

•Program settings are cleared when the power is turned off or the disc loading tray is opened.

•Press the MODE button to check the programmed setting.

41	EN
	01All