TD530XA/601XB 01-36 02.8.26 11:44 AM Page 33
5Set Ibeg rmi,'_g Ibou,
Press the Arrow • or •button until
the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then, press the Arrow I1_ button.
Set II'se__wd,'_g ,}_t'_u_@
Press the Arrow • or • button until
the desired minute appears.
(Example: "30" for 7:30PM)
Then, press the Arrow I1_ button.
Set ÷r_@Ihou,'
Press the Arrow • or • button until
the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then, press the Arrow I_ button.
8Set end m t',uU:e
Press the Arrow • or • button
until the desired minute appears.
(Example: "50" for 8:80PM)
Then, press the Arrow I_ button.
9 Set the ts_e speed
Press the Arrow • or • button
until the desired tape speed
appears. (Example: SP)
1() Fnsh settirtg the progh_m
Press the Arrow I_ or <1 button. The program is now
completed.
• To set another program, repeat steps [21 to [10].
• Press the SETUP button on the remote control to
return to original mode.
_ Set he tiim÷r
Press the POWEP, button to set automatic timer
recording. The TIMER REC indicator lights up.
• You must turn off the TV/DVD/VHS to activate
automatic timer recording.
If power is not turned off and you continue watch-
ing TV, "TIMER REC STANDBY" starts flashing
on the TV screen 2 minutes before the programmed
start time.
To shift the time schedule of an automatic timer
recording.
l)Press the POWER button.
2)Repeat step [1] on page 32.
3)Press the RECORD button and select the desired
program using the Arrow • or • button.
4)Press the RECORD button again.
Each additional push will shift forward the
begin/end time for recording by 10 minutes. When
the recording is already in progress, each additional
push will shift forward the end time only. If you
want to cancel while setting, press the PAUSE but-
ton on the remote control. The recording time
returns to the original time.
NOTE: When you shift forward the time schedule
during recording, the recording speed will automati-
cally be set to the SLP mode.
5)Press the Arrow _ or <1 button to exit the setting
menu. Then press the SETUP button on the remote
control to return to original mode.
70 CO]?RE_ 'F A H_,_O(f{'AM
•While setting a program; press the Arrow <1 but-
ton to go back one step and enter the correct num-
bers using the Arrow • or • button.
•After setting a program;
l)Press the POWER button.
2)Repeat steps [1] - [2] on page 32.
3)Press the Arrow I_ button (or press the Arrow <1
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the Arrow • or • button.
4)Press the POWER button to set automatic timer
recording.
ZV?CAN(;Ts'L AN A UZ'OMAZ7_: ZT,WERR_'ECOIH_Y?d(•After setting a program;
l)Press the POWER button.
2)Repeat steps [1] _ [2] on page 32 and select a
program you want to cancel.
3)Press the C.RESET button.
4)Press the SETUP button on the remote control to
return to TV mode.
•While recording is in progress;
l)Press POWER button.
2)Press the STOP/EJECT button on the
TV/DVD/VHS.
-33- ENIC29