Sets the system password. A password is required for starting up the system and running the SCU program. When setting password, make sure that NumLock is off, then type the password in the entry field and press Enter. Confirm your password by typing it again and pressing Enter. For the password to take effect, enable the Enable Password item.
SCU Password
Sets the SETUP password. A password is required for running the SCU program. When setting password, make sure that NumLock is off, then type the password in the entry field and press Enter. Confirm your password by typing it again and pressing Enter. For the password to take effect, enable the Enable Setup Password item.
Setup Configuration Utility (SCU) |