
If you are using the battery power, make sure that the battery is not discharged.
When you turn on the computer, it stops after POST.
Restart your computer.
The message “Non
Make sure that there is no floppy disk in the floppy disk drive. If there is, remove it and restart the system.
If this message appears when you are booting from the hard disk, insert a bootable disk in the floppy disk drive and check the condition of the hard disk.
Make sure that the hard disk is recognized correctly in the SCU program.
The message
If you are deliberately trying to boot from a floppy disk, replace the disk with a bootable one and press any key to continue booting.
If you are booting from the hard disk, make sure that there is no floppy disk in the floppy disk drive. If there is, remove it and restart the system.
If this message appears when you are booting from the hard disk, insert a bootable disk in the floppy disk drive and check the condition of the hard disk.
Make sure that the hard disk is set correctly in the SCU program.
Other Problems
The date/time is incorrect.
Correct the date and time via the operating system or SCU program.
Troubleshooting |