TAG 200 manual Installing the CD/Combo/DVD RW Drive

Models: 200

1 143
Download 143 pages 32.41 Kb
Page 43
Image 43

NOTE: For Combo/DVD RW drive only.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Installing the CD/Combo/DVD RW Drive

To install the CD/Combo/DVD RW drive:

1.Open the optical drive bay cover by pressing on both sides of the release latch using your thumb and index fingers.

2.Insert the CD/Combo/DVD RW drive into the optical drive bay located on the left side of the computer.

3.Close the optical drive bay cover to secure the CD/Combo/DVD RW drive in place.

To remove the CD/Combo/DVD RW drive:

1.Open the optical drive bay cover by pressing on both sides of the release latch using your thumb and index fingers.

2.Gently place the computer upside down.

3.Lift up the handle of the optical drive release knob and turn it counter-clockwise. The CD/Combo/DVD RW drive will slide out partially. Gently pull on it to remove it.

2-16

Operating Your Computer

Page 43
Image 43
TAG 200 manual Installing the CD/Combo/DVD RW Drive