Turn off power management.
PC Card Problems
The PC card does not work.
Make sure that the PC card is correctly seated.
If the card requires an IRQ (Interrupt ReQuest), make sure that there is one available. Or you can release another device IRQ in SCU.
The PC card stops communicating properly.
The application may have been reset when the computer is turned off or in Standby mode. Exit and restart the application.
Power Management Problems
The computer does not enter Standby or Hibernation mode automatically.
If you have a connection to another computer, the computer does not enter Standby or Hibernation mode if the connection is actively in use.
Make sure that the Standby or Hibernation
The computer does not enter Standby or Hibernation mode immediately.
If the computer is performing an operation, it normally waits for the operation to finish.
The computer does not resume from Standby or Hibernation mode.
The computer automatically enters Standby or Hibernation mode when the battery pack is empty. Do any one of the following:
−Connect the AC adapter to the computer.
−Replace the empty battery pack with a fully charged one.
Troubleshooting |
