TAG 200 manual SCU Password, Hard Disk Encryption

Models: 200

1 143
Download 143 pages 32.41 Kb
Page 92
Image 92

Allows you to set the password for booting-up your system. When typing the password, first make sure that Num Lk is off, and then type the password in the entry fields and press Enter. Confirm your password by typing it again and pressing Enter. If the Enable Password to Power-onsub-item is enabled, the power-on password is always required to boot the computer.

SCU Password

Allows you to set the password for entering SCU Setup. When typing the password, first make sure that Num Lk is off, and then type the password in the entry fields and press Enter. Confirm your password by typing it again and pressing Enter. If the Enable SCU Password sub-item is enabled, the SCU password is always required to enter SCU Setup.

Hard Disk Encryption

Enables or disables hard disk drive encryption (including boot sector, operating system, temporary and swap files). Attempts to circumvent security by booting from a floppy disk or by removing the hard drive to be read on a different machine would prove futile since the entire content of the hard drive is encrypted. A checkmark ( ) indicates enabled, while an underline (_) indicates disabled.

Setup Configuration Utility (SCU)

5-13

Page 92
Image 92
TAG 200 manual SCU Password, Hard Disk Encryption