Using the Secondary Battery Pack
If you often rely on battery power for a long period of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup.
To install the secondary battery pack, follow these steps:
1.Locate the optical drive slot on the left side of the system.
2.Open the slot cover by pressing on both sides of the release latch using your thumb and index fingers.
3.Gently place the computer upside down.
4.Lift up the handle of the optical drive release knob and turn it
Lift up and turn
5.Slide the secondary battery pack all the way into the slot. Make sure to observe the correct orientation (the ribbon strip must face outward for future battery pack removal).
6.Close the slot cover to secure the secondary battery
Managing Power |