TAG 200 manual Long rubber cushion Short rubber cushions

3.Remove the long rubber cushion on the left side and two short rubber cushions on the right side.

1 long rubber cushion 2 short rubber cushions

4.To install the SO-DIMM, match the SO-DIMM's notched part with the socket's projected part and firmly insert the SO-DIMM into the socket at a 20-degree angle. Then push down until the retaining clips lock the SO-DIMM into position.

5.Replace the long rubber cushion on the left side and two short rubber cushions on the right side.

6.Replace the SO-DIMM compartment cover and secure with ten screws.

7.

Expanding Your Computer 4-13