TAG 200 manual Display Problems, You cannot eject a disc, Nothing appears on the screen

You cannot eject a disc.

The disc is not properly seated in the drive. Manually release the disc following the method described next:

1.Turn off the system.

2.Insert a small rod, such as a straightened paperclip, into the drive’s manual eject hole and push firmly to release the tray.

3.Pull the tray out until fully extended, and then remove the disc.

Eject hole

Display Problems

Nothing appears on the screen.

If the power-on indicator is not on, check the electrical outlet, the plugs and power cords.

If the power button does not respond to a light touch, press the button firmly.

If you are using battery power, make sure that it has a charge remaining and that it is installed correctly.

During operation, the screen may automatically turn off as a result of power management. Press any key to see if the screen comes back.

Troubleshooting 8-5