Lift up and turn
Inserting and Removing a Disc
Follow this procedure to insert or remove a disc.
1.Turn on the computer.
2.Open the optical drive bay cover by pressing on both sides of the release latch using your thumb and index fingers.
3.Press the eject button and the CD tray will slide out partially. Gently pull on it until it is fully extended.
4.To insert a disc, place down the disc in the tray with its label facing up. Slightly press the center of the disc until it clicks into place.
To remove a disc, hold the disc by its outer edge and lift it up from the tray.
5.Gently push the tray back into the drive.
NOTE: In the unlikely event that you are unable to release the CD tray by pressing the eject button, you can manually release the disc. (See “Optical Drive Problems” in Chapter 8.)
Operating Your Computer |
