
LPT Port
This item configures the parallel port of the computer.
Port Address sets the I/O address and the Interrupt ReQuest line settings of the parallel port. The options are None; LPT1, 378, IRQ7; LPT2, 278, IRQ5; and LPT3, 3BC, IRQ7.
Port Definition sets the operating mode for the parallel port according to the type of the parallel device to be connected. Your system supports EPP (Enhanced Parallel Port) and ECP (Extended Capabilities Port) standards, which turn the standard parallel port into a
MC97 Controller
Enables or disables the system’s support for PCI modem device. A check mark ( ) indicates enabled; an underline (_) indicates disabled.
Setup Configuration Utility (SCU) |