TANDBERG GWDataport Command Interface User Guide
| Example of ipaddress feedback: |
| *P ipaddress 1 static 10.0.5.98 |
| *P ipaddress 1 subnetmask 255.255.0.0 |
| *P ipaddress 1 gateway 10.0.0.1 |
|
|
ipassignment | Selects between DHCP (Dynamic Host Configuration Protocol) or static IP address |
| allocation. When DHCP is selected the GW will automatically receive all the |
| necessary information from the DHCP server. This function should be used when |
| the GW is connected to a LAN using DHCP. When using this mode, |
| |
| ipassignment [LAN interface] <dhcp/static> |
|
parameters:
•LAN interface: 1. Number identifying the LAN interface. If this parameter is omitted the command applies to all interfaces (only interface 1 is in use).
| Example of ipassignment feedback: |
| *P ipassignment 1 static |
|
|
ipmtu | Sets the maximum IP packet size to be used for H.323 calls. It can be useful to |
| reduce the packet size when packets are transmitted over links that add overlay |
| (f.ex. VPN). Reducing the packetsize will prevent the packets from being |
| fragmented. |
| ipmtu |
| Example of ipmtu feedback: |
| *P ipmtu 1400 |
|
|
ippassword | Sets a password to restrict access to the GW’s webserver, telnet and ftp resources. |
| ippassword [LAN interface] <password> |
|
parameters:
•LAN interface: 1. Number identifying the LAN interface. If this parameter is omitted the given value is set for all interfaces (only interface 1 is in use).
•password: Textstring of maximum 16 characters. If the password is forgotten it can be deleted using the command ippassword “” through the
NOTE! The default password is “TANDBERG”.
ipspeed | Sets LAN port speed. |
| NOTE! The GW needs to reboot before the changes will apply. |
| ipspeed [LAN interface] <speed> |
|
parameters:
•LAN interface: 1. Number identifying the LAN interface. If this parameter is omitted the given value is set for all interfaces (only interface 1 is in use).
•speed: auto/10half/10full/100half/100full. The speed is either set to auto or manually from 10mb half duplex to 100mb full duplex. When set to auto the GW will automatically negotiate with the network and use the
D13202 Rev 01 | 10 |