TANDBERG D13202 prichan PRI interface low 1..23/31, prichan PRI interface high 1..23/31, pricrc4

TANDBERG GWDataport Command Interface User Guide

	prichan <PRI interface> low <1..23/31>
	or
	prichan <PRI interface> high <1..23/31>
	or
	prichan <PRI interface> search <high/low>
	---
	parameters:
	•	PRI interface: a/b/c/d. Letters identifying the different PRI interfaces.
		o	a: PRI interface 1
		o	b: PRI interface 2
		o	c: PRI interface 3
		o	d: PRI interface 4
	sub-commands:
	•	max: Sets a limit on the number of channels that will be available for
		incoming and outgoing calls.
		Values: 1-23 for T1 PRI, 1-30 for E1 PRI.
	•	low: Used together with high to define the line hunting strategy. The GW
		will search for available channels between low and high. This allows other
		devices to reserve channels outside this range
		Values: 1-23 for T1 PRI, 1-31 for E1 PRI.
	•	high: ref. low
	•	search: Specifies if the search for available channels are to start from the
		lower or higher limit.
	Example of prichan feedback:
	*P prichan a max 23
	*P prichan a low 1
	*P prichan a high 23
	*P prichan a search high
pricrc4	Turns the the CRC check for PRI-E1 on/off. CRC is default on and should stay on
	in most cases.
	pricrc4 [PRI interface] <on/off>
	---
	parameters:
	•	PRI interface: a/b/c/d. Letters identifying the different PRI interfaces. If
		this parameter is omitted the given value is set for all interfaces.
		o	a: PRI interface 1
		o	b: PRI interface 2
		o	c: PRI interface 3
		o	d: PRI interface 4
	Example of pricrc4 feedback:
	*P pricrc4 a on
	*P pricrc4 b on
	*P pricrc4 c on
	*P pricrc4 d on
prinet	Selects ISDN PRI protocol.
	prinet <protocol>
	---
	parameters:
	•	protocol: ni/att/euro.
		o ni - National ISDN (North America)
		o att – AT&T ISDN (North America)
D13202 Rev 01			14