TANDBERG D13202 manual network auto/h320/h323, pardial on/off, pricable, cablelength 1/2/3/4/5

TANDBERG GWDataport Command Interface User Guide

	---
	parameters:
	• profile number: p1/p2/p3/p4/p5/p6. The GW can hold as many as six
		profiles (p1, p2 and p3 are predefined and can not be changed).
	• call prefix: The prefix number for this profile.
	• profile name: The profile’s name. Textstring of maximum 8 characters.
	•	network: auto/h320/h323
		NOTE! This parameter will be overridden by the GW, ref. command
		calltransfer.
	Example of netprofile feedback:
	*P netprofile p1 "" Auto auto
	*P netprofile p2 "" ISDN h320
	*P netprofile p3 "" H323 h323
	*P netprofile p4 0 Ext auto
	*P netprofile p5 1 test auto
	*P netprofile p6 2 test2 auto
pardial	Sets parallel dial mode for BONDING calls. If pardial is set to off the GW will set-
	up BONDING calls by dialling all channels in a sequential manner, i.e. the system
	will wait for a connection on the current channel before attempting to connect the
	next.
	pardial <on/off>
	---
	Example of pardial feedback:
	*P pardial off
pricable	Sets PRI interface cable lengths.
	pricable [PRI interface] <cablelength>
	---
	parameters:
	• PRI interface: a/b/c/d. Letters identifying the different PRI interfaces. If
		this parameter is omitted the given value is set for all interfaces.
		o	a: PRI interface 1
		o	b: PRI interface 2
		o	c: PRI interface 3
		o	d: PRI interface 4
	•	cablelength: 1/2/3/4/5.
		o 1: 0-133 ft (0-40 m)
		o 2: 133-266 ft (40-81 m)
		o 3: 266-399 ft (81-122 m)
		o 4: 399-533 ft (122-162 m)
		o 5: 533-655 ft (162-200 m)
	Example of pricable feedback:
	*P pricable a 1
	*P pricable b 1
	*P pricable c 1
	*P pricable d 1
prichan	This command is used to configure the channel hunting strategy for the PRI
	interfaces.
	prichan <PRI interface> max <1..23/30>
	or
D13202 Rev 01			13