TANDBERG manual S chanstat a 28 connect 123456789 255255 334Sec, D13202 Rev

TANDBERG GWDataport Command Interface User Guide

chanstat	Used to list channel status information for the PRI interface.
	chanstat [pri interface] [channel]
	Status format:
	chanstat <PRI interface> <channel> <channel-status> <calling-number>
	<causeLoc>:<chanCause> <connection-time(sec)>
	---
	Parameters:
	•	PRI interface: a/b/c/d. Letters identifying the different PRI interfaces.
		o	a: PRI interface 1
		o	b: PRI interface 2
		o	c: PRI interface 3
		o	d: PRI interface 4
	•	channel: 1..31(E1-PRI), 1..24(T1-PRI)
	•	channel-status: idle / answering / calling / connect / disconnecting /
		disconnected
	•	calling-number:Remote number. (“” if no valid number)
	•	causeLoc: Standard ISDN cause location value (255 indicates no valid
		code).
	•	chanCause: Standard ISDN cause value (255 indicates no valid code).
	•	connection-time(sec):Connection time in seconds.
	Example of chanstat feedback:
	*S chanstat a 28 connect 123456789 255:255 334Sec
encstatus	Returns encryption status for the active calls.
	encstatus [callid]
	Status format:
	encstatus <callid> <incomingstat> <outgoingstat> <check-code>
	---
	Parameters:
	•	callid: 1..16/32. Identifier referring to a call.
	•	incomstat: off/idle/des/aes128/negotiate
	•	outgoingstat: off/idle/des/aes128/negotiate
	•	check-code:Key that can be manually presented by the participants to
		confirm secure connection
	Example of encstatus feedback:
	*S encstatus 11 des des 9FE389C8F664F3F5
	Lists the active terminals in a GW call.
	gwcalls [gwid]
	Status format:
	gwcalls <gwid> <isdn callid> <isdn termnumber> <h323 callid> <h323
	termnumber>
	---
	Parameters:
	•	gwid: 1..16. Identifier referring to a GW call.
	•	isdn callid: The call id of the ISDN terminal
	•	isdn termnumber: The number of the ISDN terminal
D13202 Rev 01			23