TANDBERG D13202 manual Configuring The Dataport From The Web Interface, Troubleshooting

TANDBERG GW Dataport Command Interface User Guide

2.2.Configuring The Dataport From The Web Interface

Click on System Configuration tab and then the Dataport button. The Dataport can be configured by setting baudrate, parity, databits and stopbits.

2.3.Troubleshooting

If communication cannot be established between the PC/terminal and the TANDBERG GW’s Dataport the following should be checked:

•Verify that the serial cable is a straight through 9-pin to 9-pin cable

•Confirm that the configuration of the PC/terminal’s serial RS-232 port is identical to the configuration of the TANDBERG GW RS-232 port.

•Verify that the PC/terminal’s serial RS-232 port is working properly by connecting it back-to-back to another PC/terminal and send characters in both directions1.

1It requires a null-modem cable to perform this test

D13202 Rev 01 5