TANDBERG GWDataport Command Interface User Guide
4.2.3. System Status Commands
| Command: | Description: |
| |
| callhistory | Used to list call related information for the last 20 calls. |
| |
|
| callhistory [logid] |
| |
|
| Status format: |
| |
|
| callhistory <logid> <logtag> <gwlogtag> <remote numb.> |
| |
|
| <causecode> <time> <inc. restrict> <outg. restrict> <inc. encrypt. stat> <outg. |
| |
|
| encrypt. stat> <gwcallid> |
| |
|
|
|
| |
|
| Parameters: |
| |
|
| • | logid: 1..20. Id referring to a disconnected call. The last disconnected call |
|
|
|
| will have id 1. |
|
|
| • | logtag: Unique number identifying the disconnected call. |
|
|
| • | gwlogtag: Unique number identifying a GW call. |
|
|
| • | remote numb: The remote sites ISDN number. |
|
|
| • |
| |
|
| • | chan: speech / |
|
|
|
| where chan indicates number of B channels. |
|
|
| • | causecode: Standard ISDN cause code. The cause codes can be used to |
|
|
|
| find out why the call was disconnected (255 if no valid code). |
|
|
| • | time: Total calltime in seconds. |
|
|
| • | inc. restrict: restrict / norestrict. Indicates if the incoming call was |
|
|
|
| restricted. Restricted calls only utilize 56kb out of an ISDN 64kb channel. |
|
|
| • | outg. restrict: restrict / norestrict. Indicates if the outgoing call was |
|
|
|
| restricted. |
|
|
| • | inc. encrypt. stat: off/idle/des/aes128/negotiate. Indicates incoming |
|
|
|
| encryption status. |
|
|
| • | outg. encrypt. stat: off/idle/des/aes128/negotiate. Indicates outgoing |
|
|
|
| encryption status. |
|
|
| • | gwcallid: 1..16 |
|
|
| Example of callhistory feedback: |
| |
|
| *S callhistory 1 42 1 6090 outgoing |
| |
|
| off 1 |
|
|
|
|
|
| |
| callstatus | Returns status of current calls. |
| |
|
| callstatus [callid] |
| |
|
| Status format: |
| |
|
| callstatus <callid> <direction> <type> <status> <cause> <time> |
| |
|
|
|
| |
|
| Parameters: |
| |
|
| • | callid: 1..16/32. Identifier referring to a call. |
|
|
| • | direction: incoming/outgoing. |
|
|
| • | type: idle / speech / |
|
|
| • | status: idle / answering / calling / connected / disconnecting / |
|
|
|
| disconnected |
|
|
| • | cause: Standard ISDN cause code. The cause codes can be used to find |
|
|
|
| out why the call was disconnected (255 if no valid code). |
|
|
| • | time: connect time in seconds. |
|
|
| Example of callstatus feedback: |
| |
|
| *S callstatus 1 outgoing bonding connected 255 2446Sec |
| |
|
|
|
|
|
| D13202 Rev 01 |
| 22 |
|
