Number Range Start, Number Range Stop | TANDBERG MPS 200, MPS 800

PRI Board

PRI Interfaces (2:3)

TANDBERG MPS ADMINISTRATOR GUIDE

PRI Interface Configuration (2:3)

Specifies where the TANDBERG MPS will start searching for available B-channels for each PRI-line for an outgoing call.

High: If set to High, the TANDBERG MPS will start to search for available B-channels at the highest numbered B-channel (Default: High)

Low: If set to Low, the TANDBERG MPS will start searching for available B-channels at the lowest numbered B-channel.

The MPS tries to keep the H0-channels free as long as possible and will therefore not start searching at the lowest numbered channel when set to Low.

Number Range Start

The PRI lines connected to the TANDBERG MPS should have at least one number each, to allow dial in from ISDN. If the PRI line has a range of numbers, the start number must be entered here. (Default: Empty)

The number range must be inclusive. All numbers in the range may be used by the TANDBERG MPS for callback numbers, so the local ISDN switch must route all of these numbers to the configured PRI. Please contact your IT manager or ISDN service provider to obtain these numbers.

It is only necessary to enter the digits indicating the range. If the range is 67828669 to 67828699, then just enter 8669. Maximum amount of digits is 24.

Number Range Stop

Here is where the last number in the PRI number range is en- tered. If the range is 67828669 to 67828699, then just enter 8699. (Default: Empty)

NOTE: When receiving a call with the Gateway configured with only one number in the PRI number range, all other incom- ing calls will be blocked until the ongoing call is established. This is because the network will have no additional number available for the second call while setting up the call. When the call is established the number will be available and any incoming call will connect as normal.

Network Configuration

- continued: PRI Board Configuration

Save - Press the Save button to save changes.

Main	Table of	Introduction	Installation	Quick	Using	System	System	Gateway	MCU	Technical	Appendices
Main	Contents	Introduction	Installation	Setup	the MPS	Status	Configuration	Configuration	Configuration	Descriptions	Appendices
D 13373.08					92						MPS
NOVEMBER 2007					92						MPS

MPS 800, MPS 200 specifications

The TANDBERG MPS 200 is an advanced multipoint conferencing solution designed to enhance communication and collaboration in various environments. Renowned for its robust performance and versatile features, the MPS 200 caters to businesses and organizations seeking to integrate video conferencing seamlessly into their operations.

One of the standout features of the MPS 200 is its ability to support high-definition video conferencing. Ensuring crystal-clear imagery, it accommodates various video standards, including H.264, allowing for efficient bandwidth usage without compromising quality. This makes it an excellent choice for organizations that require high-quality video for their meetings, presentations, or training sessions.

The MPS 200 also supports a wide range of participants, facilitating large-scale conferences with multiple endpoints. It can connect numerous participants simultaneously, allowing teams from different locations to collaborate effectively. This scalability is essential for businesses that frequently host meetings with various stakeholders, enabling seamless interaction and engagement.

Another noteworthy technology integrated into the MPS 200 is its flexibility in connectivity. It supports a variety of protocols, including SIP and H.323, ensuring compatibility with existing infrastructure. This flexible design allows organizations to integrate the MPS 200 into their current systems with minimal disruptions, making it an attractive option for businesses looking to upgrade their conferencing capabilities.

In addition to video conferencing, the MPS 200 offers features such as content sharing, which enables users to share documents, presentations, and other materials during meetings. This functionality enhances collaboration by allowing participants to view and discuss content in real-time, fostering engagement and ensuring that everyone remains on the same page.

The user interface of the MPS 200 is designed for ease of use, providing intuitive controls that facilitate quick setup and management of conferences. Users can initiate or join meetings with just a few clicks, ensuring that technology does not hinder productivity.

Security is a priority with the MPS 200, which incorporates various encryption methods to protect sensitive information during video calls. With security becoming increasingly important in today’s digital landscape, this feature offers peace of mind to users, particularly in enterprise environments.

In summary, the TANDBERG MPS 200 stands out as a comprehensive multipoint conferencing solution that delivers high-quality video, extensive connectivity options, and advanced collaboration features. Its user-friendly design, scalability, and robust security measures make it a vital asset for organizations aiming to enhance their communication strategies in the digital age. Whether for internal meetings or external engagements, the MPS 200 serves as an indispensable tool for effective collaboration.

TANDBERG MPS 200, MPS 800 manual Number Range Start, Number Range Stop

Models: MPS 800 MPS 200