Network Interfaces

Media Processing Board Interface

TANDBERG MPS ADMINISTRATOR GUIDE

Chassis

Media Processing Board Interface

TANDBERG MPS 800

The TANDBERG MPS 800 has a 9U-19” rack-mountable chassis that can host up to 8 Media Processing Boards and 4 Network Interface Cards.

TANDBERG MPS 200

The TANDBERG MPS 200 has 3U-19” rack- mountable chassis that can host up to 2 Media Processing Boards and 2 Network Interface Cards.

Front Chassis

The TANDBERG MPS chassis is 19” rack- mountable. On the front of the chassis is a Liquid Crystal Display (LCD) for initial con- figuration and basic system information.

Media Processing Board

Add-on boards for media processing are installed in adjacent slots in the chassis.

The Media Processing Boards are handling the following functions:

•Video processing. See Video Features in the Technical Descriptions section for details.

•Audio processing. See Audio > Create Conference in the Using the MPS section for details.

•Transcoding. See Transcoding and Ratematching in the Technical De- scriptions section for details.

•Encryption. See Secure Conference (Encryption) in the Technical De- scriptions section for details.

•Continuous Presence/Voice Switching. See Video Features in the Tech- nical Descriptions section for details.

Front View

The Media Processing Board is equipped with LAN interface for H.323 media:

•1xLAN/Ethernet (RJ-45) 10/100 Mbps

4 Light Emitting Diodes (LEDs) for board status.

1.Alarm: Red Alarm indicates that the Ethernet link is lost

2.Alarm: Flashes during startup and/ or media processing board applica- tion failure.

3.Active: Green in normal operation

4.Power: Green in normal operation

Alarm

Alarm

Active

Power

4 LEDs

10/100 BASE T (Ethernet 10/100)

You will also find 4 Light Emitting Diodes (LEDs) for power status. The backplane of the chassis is provided with advanced CompactPCI technology for high speed communication between the boards. You will find 3 cooling fans in the lower front of the chassis.

Rear Chassis MPS 800

The TANDBERG MPS 800 is shipped with

2hot-swappable power units for configura- tions of 1 to 3 Media Processing Boards. If the unit has more than 3 Media Process- ing Boards the TANDBERG MPS 800 is equipped with 3 hot-swappable power units. The power units are installed at the back of the chassis. You will also find the power switch/connector at the back of the chassis.

Rear Chassis MPS 200

The TANDBERG MPS 200 is shipped with 1 power unit integrated in the chassis.

TANDBERG MPS 800 has support for up to 8 Media Processing Boards. TANDBERG MPS 200 has support for up to 2 Media Processing Boards.

Each Media Processing Board gives:

•5 fully featured conferences

•20 video sites @ 384kbps

•16 audio sites @ 64kbps

One media board is, in conjunction with a network interface card, capable of a total of 7680 kbps for H.320/ISDN calls. For IP video calls without encryption it can handle 15360 kbps.

Two different IP Networks

If your TANDBERG MPS is connected to two different IP Networks utiliz- ing both of the Ethernet ports (LAN and Enet2) on the System Controller Board, you need to pre-define the Media Processing Boards to Network #1 or Network #2. This is done in the Media Board Configuration in the System Configuration section, by choosing either Network ID 1 or 2 for the respective Media Processing Boards.

Advanced Video Option

Advanced Video Option

A Media Processing Board can be purchased with or without the Advanced Video Option (AVO). See Video Features in the Technical Description sec- tion for further information.

All video participants will use one Advanced Video Option. In addition one Advanced Video Option will be used if Dual Stream is enabled in the conference.

The Advanced Video Option gives support for the following:

•Continuous Presence

•Dual Stream - support for both DuoVideoTF, H.239 and BFCP

•Custom Video Formats (Digital ClarityTF)

•Best ImpressionTF

All Media Boards should be connected to the IP network and be given an IP address to work properly, see Media Board IP Configuration for details.

Main

Table of

Introduction

Installation

Quick

Using

System

System

Gateway

MCU

Technical

Appendices

Contents

Setup

the MPS

Status

Configuration

Configuration

Configuration

Descriptions

 

 

 

 

D 13373.08

 

 

 

 

147

 

 

 

 

 

MPS

NOVEMBER 2007

 

 

 

 

 

 

 

 

 

Page 146 Page 148
Page 147
Image 147
TANDBERG MPS 800, MPS 200 manual 147, Media Processing Board Interface, Chassis, Advanced Video Option
Page 146 Page 148

MPS 800, MPS 200 specifications

The TANDBERG MPS 200 is an advanced multipoint conferencing solution designed to enhance communication and collaboration in various environments. Renowned for its robust performance and versatile features, the MPS 200 caters to businesses and organizations seeking to integrate video conferencing seamlessly into their operations.

One of the standout features of the MPS 200 is its ability to support high-definition video conferencing. Ensuring crystal-clear imagery, it accommodates various video standards, including H.264, allowing for efficient bandwidth usage without compromising quality. This makes it an excellent choice for organizations that require high-quality video for their meetings, presentations, or training sessions.

The MPS 200 also supports a wide range of participants, facilitating large-scale conferences with multiple endpoints. It can connect numerous participants simultaneously, allowing teams from different locations to collaborate effectively. This scalability is essential for businesses that frequently host meetings with various stakeholders, enabling seamless interaction and engagement.

Another noteworthy technology integrated into the MPS 200 is its flexibility in connectivity. It supports a variety of protocols, including SIP and H.323, ensuring compatibility with existing infrastructure. This flexible design allows organizations to integrate the MPS 200 into their current systems with minimal disruptions, making it an attractive option for businesses looking to upgrade their conferencing capabilities.

In addition to video conferencing, the MPS 200 offers features such as content sharing, which enables users to share documents, presentations, and other materials during meetings. This functionality enhances collaboration by allowing participants to view and discuss content in real-time, fostering engagement and ensuring that everyone remains on the same page.

The user interface of the MPS 200 is designed for ease of use, providing intuitive controls that facilitate quick setup and management of conferences. Users can initiate or join meetings with just a few clicks, ensuring that technology does not hinder productivity.

Security is a priority with the MPS 200, which incorporates various encryption methods to protect sensitive information during video calls. With security becoming increasingly important in today’s digital landscape, this feature offers peace of mind to users, particularly in enterprise environments.

In summary, the TANDBERG MPS 200 stands out as a comprehensive multipoint conferencing solution that delivers high-quality video, extensive connectivity options, and advanced collaboration features. Its user-friendly design, scalability, and robust security measures make it a vital asset for organizations aiming to enhance their communication strategies in the digital age. Whether for internal meetings or external engagements, the MPS 200 serves as an indispensable tool for effective collaboration.
Top Page Image Contents