Using an iPod/iPhone/iPad

Compatible iPod/iPhone/iPad models

This unit can be connected to and used with the following iPod/iPhone/iPad models.

iPod nano (2nd, 3rd, 4th, 5th and 6th generations) iPod touch (1st, 2nd, 3rd and 4th generations) iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G iPad (3rd generation), iPad 2, iPad

ppYou cannot transmit the iPod/iPhone/iPad video signal through this unit.

ppTo connect an iPod/iPhone/iPad to this unit's USB port, use the USB cable provided with the iPod/iPhone/iPad.

iPod/iPhone/iPad software

If the unit or remote control buttons do not work properly with your iPod/iPhone/iPad, updating its software might solve the problem.

Download the latest software for your iPod/iPhone/iPad from the following Apple website.

http://www.apple.com/downloads/

12

Connecting antennas

AM antennas

AM indoor loop antenna

To stand the loop antenna on a surface, insert the claw into the slot in the antenna base. Connect the loop anten- na’s wires to the AM antenna terminals.

Make sure to connect the black wire to the GND terminal. Place the antenna on a shelf or hang it on a window frame, for example, in the direction that gives the best reception. Keep all other wires such as power cords, speaker wires or interconnect cables as far away from the antenna as possible.

AM outdoor antenna

In an area where AM radio signals are weak, stretch a 6–15m insulated antenna wire horizontally by a window or outdoors, and connect it to the AM antenna connector (not the GND terminal).

ppWhen using an outdoor antenna, always connect a grounding wire to the GND terminal.

ppLeave the included AM loop antenna connected even when also using a connected outdoor antenna.