Troubleshooting (1)

If you experience a problem with this unit, please check the following items before requesting service. If it still does not operate correctly, contact the retailer where you purchased the unit or TEAC customer support (See the back cover for contact information).

General

The power will not turn on.

eCheck that the power cord is completely plugged into the power outlet.

No sound is output.

eSelect the source using the SOURCE button.

eCheck the connection to the speakers.

eAdjust the volume.

eUnplug headphones from the PHONES jack.

eIf “MUTE” is displayed, press the MUTE button.

The sound is noisy.

eThe unit is too close to a TV or similar device. Install the unit away from such devices, or turn them off.

Remote control does not work.

ePress the STANDBY/ON button to turn the unit on.

eIf the batteries are exhausted, change the batteries.

ePoint the remote control at the front panel of the unit from a distance of less than about 5 m (16 ft).

eClear obstacles between the remote control and the main unit.

eIf a strong light is near the unit, turn it off.

CD player

Will not play.

eLoad a disc with the label side up.

eIf the disc is dirty, clean the surface of the disc.

eIf a blank CD-R/CD-RW has been loaded, load a prerecorded disc.

eThis unit might not be able to play some CD-R/CD-RW discs depending on the disc quality and recording conditions.

eYou cannot play back unfinalized CD-R/RW discs with this unit. Finalize such a disc in the CD recorder you used to create the disc and try again.

Sound skips.

ePlace the unit on a stable place to avoid vibrations and shocks.

eIf the disc is dirty, clean its surfaces.

eDo not use scratched, damaged or warped discs.

ENGLISH

Continued on the next page e

49