Speaker (right) | Speaker (left) |
Connect speakers to this unit using
ppThe black speaker terminals are _ (negative). Generally, the + wire of the speaker cable is marked to make it distinguishable from the _ wire of the cable. Connect this marked wire to the red + terminal and the unmarked wire to the black _terminal.
ppCheck the impedance of your speakers. Connect speakers with an impedance of 6 ohms or more.
ppIf the exposed end of a core wire in a speaker cable contacts another cable or terminal, a short could occur. Do not allow this to happen.
ppTo avoid noise, do not bundle the speaker cables with the power cord or other cables.
Connecting speaker cables
1Turn the terminal cap counterclockwise to loosen it.
2Insert the wire into the terminal and turn the terminal cap clockwise to securely connect it.
3 Make sure it is fastened firmly by pulling
the cable lightly. | ENGLISH |
|
Connecting speakers using banana plugs
You can also connect speakers using commercially available banana plugs. Connect the speaker cable to the banana plug first, and then insert the plug into the terminal.
ppBe sure to loosen the terminal cap before using the banana plug.
ppCarefully read the instructions of the banana plugs that you intend to use with this unit.
For European customers
In accordance with European safety regulations, it is not possible to connect banana plugs to the speaker terminals on European models. The holes into which banana plugs are inserted have been covered with black caps. Connect the speakers using spades or bare wires. If the black caps become separated from the terminals, return them to their original position.
17