Programmed Playback (CD/USB/SD) (2)
3 Press the ENTER button.
ppWhen you press the ENTER button, the track number that is currently blinking will be added to the program.
Example:
To select track 2:
Press “0,” “0” and “2”, or press “2” and then press the ENTER button.
To select track 12:
Press “0,” “1” and “2”, or press “1” and “2” and then press the ENTER button.
To select track 123:
Press “1,” “2” and “3”, and then press the ENTER but- ton.
ppIf you enter a number that is greater than the total number of tracks, the highest available track number will appear blinking (and can be added to the program).
For example, if you input “999,” but the media only contains 60 tracks, “T060,” which is the highest track number, will appear and “060” will blink.
34
4 Repeat steps 
and 
to program more tracks/files.
ppIf you make a mistake, press the CLEAR button to remove the last input track/file number.
ppUp to 30 tracks/files can be programmed. If you attempt to program more than 30 tracks/files, “PROG FULL” will appear on the display.
5 When programming has been finished, press the PLAY/PAUSE button (7/9).
Programmed playback will start.
ppAfter playback of all the programmed tracks/files has finished or you stop programmed playback, you can restart programmed playback by pressing the Play/Pause button (7/9).
ppIf the PROGRAM button is pressed when playback is stopped, all program contents will be cleared.