Listening to the radio (1)

3

1

2

1 Press the SOURCE button repeatedly to select “TUNER FM” or “TUNER AM”.

When using the remote control, press its TUNER button once or twice to select FM or AM.

2 Press the TUNING MODE button to select the tuning mode.

Each time you press the TUNING MODE button, the tuning mode changes as follows:

Manual tune

 

Auto tune

 

Preset tune

3 Turn the MULTI JOG knob to tune the station you want.

38

Manual tune

Turn the MULTI JOG knob until you find the station you want. On the remote control unit, press the Scroll buttons (k/j).

The frequency changes by fixed steps (FM: 0.05 MHz for European model and 0.1 MHz for North American model, AM: 9 kHz).

Automatic tune

Turn the MULTI JOG knob to start automatic tuning.

When a station is found, the unit tunes in to the station automatically.

Press and hold one of the scroll (k/j) buttons for at least a second to start automatic station tuning. When a station is received, automatic tuning will stop.

Repeat this step until the station you want to listen to is found.

ppIf you want to stop the tuning process, press the Stop button (8).

Preset tune

Turn the MULTI JOG knob to tune in to a selected preset station.

You can also use the remote control's Skip buttons (.//) to tune in to a selected preset station.

ppFor detailed information about presetting a station, see pages 39 and 40.

If the reception is poor

Rotate or relocate the FM or AM antenna to find the best position for reception.