Listening to a connected device
You can listen to the audio signals of video players, televi- sions, portable audio players, cassette decks and other devices by connecting their line level or headphone outputs to the AUX1 and AUX2 jacks on this unit.
1 3
1 Press the SOURCE button repeatedly to select “AUX1” or “AUX2”.
You can also select “AUX1” or “AUX2” by pressing the remote control's AUX1 or AUX2 button.
2 Start playback on the connected device.
3 Turn the VOLUME knob to adjust the volume.
RDS (only for Europe) (1)
The Radio Data System (RDS) is a broadcasting service that allows stations to send additional information along with the regular radio program signal.
RDS works on the FM frequency band in Europe only.
1 Tune in to an FM RDS station (see page 38).
2 Press the RDS button (or the RDS button of the remote control unit).
ENGLISH
Pressing the RDS button cycles through RDS modes as follows:
Program service (PS)
When you select Program service, “PROGRAM SERVICE” will blink for about 3 seconds and then the program service name or station's name will be displayed. If there is no program service data, the frequency will be displayed.
RDS Program type (PTY)
When you select RDS Program type, “RDS PROGRAM TYPE” will blink for about 3 seconds and then the program type will be displayed.
Continued on the next page e | 41 |