CAUTION
Read this before attempting any operations.
ppAvoid placing the unit in direct sunlight or close to any source of heat, such as a radiator, heater, open fireplace or amplifier. Also avoid locations that are subject to vibrations or exposed to excessive dust, cold or moisture.
ppThis unit consumes energy when in standby.
ppPlace the unit in a stable location near the audio system that you will use.
ppBe careful to avoid injury when moving the unit due to its weight. Get someone to help you if necessary.
ppThe voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician.
ppAs the unit could become warm during operation, always leave sufficient space around it for ventilation. When placing this unit, position it so that it is at least 20 cm (8”) from walls and other devices in order to allow good heat dissipation. When installing it in a rack, leave at least 15 cm (6”) open above the unit and 10 cm (4”) open behind it. DO NOT place anything, not even CDs,
ppDo not open the body of the unit as this might result in damage to the circuitry or cause electric shock. If a foreign object should get into the unit, contact your dealer or TEAC service company.
ppWhen removing the power plug from the wall outlet, always pull directly on the plug; never yank on the cord.
ppDepending on the electromagnetic waves of television broadcasts, interference might appear on television screens when this unit’s power is on. This does not indicate that this unit or the TV is malfunctioning. If this occurs, turn this unit’s power off.
DO NOT MOVE THE UNIT DURING PLAYBACK
During playback, the disc rotates at high speed. Do not lift or move the unit during playback. Doing so may damage the disc or the unit.
WHEN MOVING THIS UNIT
Always remove the disc before relocating or moving this unit. Moving the unit with a disc inside could cause a malfunction.
If the surface of the unit gets dirty, wipe it with a soft cloth or use diluted mild liquid soap. Allow the surface of the unit to dry completely before using.
BBFor safety, disconnect the power cord from the socket
before cleaning. |
| |
ppNever spray liquid directly on this unit. |
| |
ppDo not use thinner or alcohol as they could damage the |
| |
surface of the unit. |
| |
ppAvoid allowing rubber or plastic materials to touch this |
| |
ENGLISH | ||
product for long periods of time, because they could | ||
| ||
damage the cabinet. |
| |
|
|
7