ppTo listen to an external source connected to an AUX IN jack, select the corresponding “AUX 1 IN” or “AUX 2 IN” setting.
ppIf the source is set to USB when an iPod/iPhone/ iPad is connected to the USB port, “USB” will appear on the display until the unit recognizes the iPod/ iPhone/iPad, then “iPod” will appear on the display.
ppYou can also select a source you want to listen to by pressing the corresponding source button on the remote control (AUX1, AUX2, TUNER, CD, iPod/ USB, SD or Bluetooth).
3 Play the source, and gradually turn the volume up to the desired level by turning the VOLUME knob.
In order to reduce power consumption, if there is no playback signal from the selected input source and this unit is not operated for 30 minutes, this unit will enter standby mode.
The unit will not enter standby mode automatically, however, if any of the following input sources are selected.
•TUNER FM
•TUNER AM
•Bluetooth (when connected to another Bluetooth device)
ppEven if Bluetooth is selected as the input source, if no | ENGLISH |
operated for 30 minutes. | |
other Bluetooth device is connected to the unit (paired), |
|
the unit will automatically enter standby mode if it is not |
|
|
|
21
1Press the TONE/BAL button to cycle through the items that can be adjusted.
BASS 
TREBLE 
BALANCE
Normal display
Continued on the next page e | 23 |