Teac CD RECEIVER, CR-H260I Restoring factory default settings

Restoring factory default settings

If the unit does not operate properly, follow the procedures below to restore the unit to its factory default settings. This might return it to ordinary operation.

3

2

1

1 Press the AUX 2 button on the remote control.

If the unit is in standby mode, press the STANDBY/ON button to turn the unit on before this operation. ppThe standby indicator lights orange when the unit

is in standby mode and is unlit when the unit is ON.

2 Press the SKIP button (.) on the remote control.

ppThe main unit’s MULTI JOG knob cannot be used to restore the factory default settings.

3 Press and hold the Stop button (8) for at least 2 seconds.

“FACTORY RESET” appears on the top line of the display. When resetting completes, “FINISHED” appears on the display.

4 Unplug the power cord from the AC socket.

5 Plug the power cord into the AC socket again.

The standby indicator lights orange.

This procedure erases everything in the unit's memory and restores it to its factory default settings.

You will need to reset the timer, tuner presets and other settings.

ENGLISH

51