Technicolor - Thomson DTH4500 warranty Peakers, System audio quality

DTH4500-GB 7/09/00 13:34 Page 37

S peakers

Speaker setting is required only if you use the 6 cinch jacks on the rear of the DVD player. In that case, the Dolby Digital / MPEG-2 decoder sends a decoded 5.1 signal to the amplifier (for further information, refer to figures 3 and 5 on pages 14-15). Speaker setting is required only at installation.

System audio quality

GB

Depending on the amplifier and connected speakers, confirm your set-up with the menu below.

Refer to pages from 13 to 15 for connections.

This interactive menu page allows you to,

•Select the speakers you have connected.

•Adjust their audio volume and respective delay.

•Configure all the decoding values for the Dolby Digital and audio multichannel MPEG 2 for your speakers.

•Display the room with the position and number of speakers (including the subwoofer).

•Choose the size and quality of your speakers by clicking twice on each speaker (function available for Dolby Digital DVD discs only).

•Adjust the delay between the front and surround speakers, and for the central speaker according to its position compared to the front speakers.

•Test the setting by running a test sound (“pink noise”).

If you do not have the 5 recommended speakers (+1: the Subwoofer) for multichannel surround

sound,

•Click twice on the icon corresponding to your missing speakers (subwoofer and/or surround speakers): they disappear from the screen. Multichannel sound will now be distributed across the remaining speakers. As you purchase more speakers, you can re-activate them one by one.

37