1 Introduction | Model 3000PA |
| | |
| | |
| | |
•Advanced Micro-Fuel Cell, designed for percent oxygen analysis. Several options are available.
•Versatile analysis over a wide range of applications.
•Microprocessor based electronics: 8-bit CMOS microprocessor with 32 kB RAM and 128 kB ROM.
•Three user definable output ranges (from 0-1% through 0-100 %) allow best match to users process and equipment.
•Air-calibration range for convenient spanning at 20.9 %.
•Auto Ranging allows analyzer to automatically select the proper preset range for a given measurement. Manual override allows the user to lock onto a specific range of interest.
•Two adjustable concentration alarms and a system failure alarm.
•Extensive self-diagnostic testing, at startup and on demand, with continuous power-supply monitoring.
•Two way RFI protection.
•RS-232 serial digital port for use with a computer or other digital communication device.
•Analog outputs for percent-of-range and for range identification. 0–1 V dc. (Isolated 4–20 mA dc optional)
•Convenient and versatile, steel, flush-panel or rack-mountable case with slide-out electronics drawer.
1.4Model Designations
3000PA: Standard model.
3000PA-C:In addition to all standard features, this model also has separate ports for zero and span gases, and built-in control valves. The internal valves are entirely under the control of the 3000PA electronics, to automatically switch between gases in synchronization with the analyzer’s operations.
3000PA-M:This model has current output signals (4-20 mA) for percent- of-range and range ID, in addition to voltage outputs.
3000PA-S:A Stainless Steel Probe and Probe Holder are used in this model, for use where resistance to corrosion is important.
1-2 | Teledyne Analytical Instruments |
