LCD Screen and Associated Buttons, Record Control | Telos NX12

user operation 37

Record Control

This is intended to control an external recording device. It operates only if connected. Pressing the button once when nobody is on air, arms the recording feature (LED blinking).

Once armed, taking a call starts the recorder automatically (LED solid). When the call is dropped, the recorder will be stopped and the system will re enter the “armed” state.

Pressing the button when a call is already on air starts the recorder (LED solid).

While recording (LED solid), pressing the button stops the recorder and puts the system back in the armed (LED blinking).

When in armed state (LED blinking), pressing the button cancels the recording feature.

When the Nx12 is used in any of the two-studio modes, the record logic will only operate from Desktop Directors accessing SHOW1. The Record button is disabled for any Director con- nected to SHOW2.

LCD Screen and Associated Buttons

The LCD is used for general information and for configuring the Desktop Director.

Items can be selected and changed using the six buttons immediately below the LCD screen. The buttons in the row immediately below the LCD screen are “soft keys” and their function will be indicated on the bottom row of the screen.

Here is the main, default screen:

DD1 Hybrid1&2

[Talent]

menu lcd volume

Menu Navigation

The LCD screen and menu navigation buttons are used to adjust volume, LCD screen backlight and contrast, and to change configuration items. The function of the three soft keys, immedi- ately below the LCD screen will vary depending on context and will always be displayed on the screen. In most cases, the left soft key offers a back function. This takes you back to the main screen without saving unconfirmed changes (except for in the Volume and LCD screens, where changes are effected immediately).

The ∆ & ∇ buttons scroll through the options in a menu list, and the Select button chooses a menu item or confirms an entry.

Volume Menus

Pressing the soft key button below the word Volume will display the following screen:

Image 47

Telos NX12 user manual LCD Screen and Associated Buttons, Record Control, Menu Navigation, Volume Menus

Contents

Telos Nx12 Trademarks We support you Telos Europe Telos Systems USAPage Table of Contents Basic Configuration Detailed Configuration & Reference Vii Specifications USA Isdn Ordering Guide Welcome to the Nx12 Features & BenefitsIntroduction Why Isdn Makes Sense for Broadcast Talk Show Systems Introduction Step up in Quality and Flexibility Two-Studio Modes Connections to the Telco circuits InstallationGetting Started Alphabet Soup U, S, and NT1 Connecting the Nx12 to Analog LinesIsdn Technology Special Considerations for Euro-ISDN ETS 300 users Data and VoiceHunt Groups Interface Status LEDs Connecting the Nx12 to IsdnIsdn in USA & Canada Using the U Interface Ordering Help Isdn S-interface cable Hot Tip USA and Canada Using IsdnUsing Pots Integration with a PBX Mix-Minus Using a modern broadcast console’s mix-minus capabilityStudio Audio Connections ‘Making do’ with an older console Phones and Remotes Using a small mixerUsing a production-style console Analog Inputs Input To Caller AES Digital Inputs Analog Input XLR AES Digital Outputs Output CallerPOH Program on Hold Inputs Analog Outputs AES3 Output XLR Desktop Director Ports Console Director Desktop DirectorExtended Desktop Director Call Controller Multiple Desktop Directors on a Single Port Connecting Desktop DirectorsExtended Distance with Power Supply Direct Connection Desktop Director Cable Desktop Director Termination Removal Line Designation Strip Desktop Director AssemblyEthernet Connections Record Control Outputs See Section Parallel Gpio Remote Control Output Characteristics Input Characteristics Grounding AC mains PowerSurge Protection Step-by-Step Basic ConfigurationConfiguration for Telephone Lines Isdn Setup Analog Phone Line Setup Basic configuration More Tips Is the Isdn working? Levels, Levels, Levels Audio Input and Output Time to test it out What now? Page Desktop Director Status Symbol IconsUser Operation Call is On-Air Column Call is On-Air & Locked Column Hold & Drop Talent ModeProducer Mode Line Button Columns Function Buttons Block AllDialing Keypad Menu Navigation Volume MenusLCD Screen and Associated Buttons Record Control Other Menu options Changing Between Producer and Talent Modes Screened Hold Using the Director in Producer ModeAnswering calls Normal Hold Drop and Hold Using the Director in Talent on-air ModeBlock All Conferencing callers on the handset/headset Locking VIP calls Conferencing multiple callers on-air using call lockingUsing the Director as a Telephone Next Console Director Call Controller First Step Detailed Configuration & ReferenceLevel Metering Line Status Status Displays Activated Desktop Director StatusAccepting Call Connected Menu Navigation & Item Selection LCD/Button User InterfaceWeb User Interface Nominal Input Level Audio Menu Nominal Output Level Meter ModePhone Send Adjustment Noise Gate Call DuckingReceive AGC Feedback Reduction Mix Minus ModeReceive EQ Caller Dynamic Digital EQ Ddeq In/multiple out In/1 out Channel default AES Mode Channel Telco MenuPots Country Hookflash Ring-in Before Caller ID Web only Enable Auto Call Drop Web onlyLoop Current Checking Web only CPC loop drop threshold ms Web only For USA & Canada and a few other parts of the world Guessing the Isdn Protocol setting in Canada & the USAFor Europe and many other parts of the world SPIDs and MSN/DNs Web Only DN Directory Number MSN Multiple Subscriber Number Clock Loss TCP/IP SetupSystem Menu Contrast LCD Only Show Mode LCD OnlyTo enter IP addresses using the LCD/button interface Audio Loop LCD Only Factory Defaults LCD OnlyReboot LCD Only Hold on Select Single-studio Modes Firmware Update Web OnlyShow Modes This option causes the system to be split as follows Sharing the Nx12 Two-studio Modes Selecting a Show using a Desktop Director Connecting Assistant Producer to a Show LivewireSelecting a Show using a Call Controller Selecting a Show using a Console Director Section Axia Consoles Quality of Service Call-control Software Firmware UpdateOther Uses of the IP/Ethernet Interface Help return Login Telos returnTelnet Windows Telnet ? Isdnlog return ? CPC return Receive Caller Audio Processing System Signal Flow and Audio ProcessingSend Audio Processing Digital Dynamic Equalizer High-pass ‘hum’ FilterReceive Automatic Gain Control Noise Gate Feedback Control Section System Software & Firmware Technical Data & TroubleshootingGeneral Troubleshooting Overview Section Spid Pending Troubleshooting Isdn ProblemsStatus Screen for Isdn troubleshooting Condition Can’t Get Isdn Ready Indication Are you using the Nx12’s internal NT1? USA & Canada only What does the Isdn Cause phrase say? Are your SPIDs and Telco setting correct?Is your long-distance carrier OK? Any other Isdn troubleshooting tips? Condition Intermittent Isdn ProblemsAre the problem confined to incoming call only? What is consistent about the problem look for patterns? Replaceable Modules and Hardware Servicing Troubleshooting Desktop Director ProblemsFuse Replacement Access to the Main PCB Class 1.1 normal Isdn Cause Phrases/Values Cause No Excessive Digits Received, call is proceeding Cause No Call is proceeding/PreemptionCause No Preemption, reserved Cause No Prefix 1 not dialed DMS Custom only Cause No No circuit available circuit/channel congestion Class 1.2 resource unavailableCause No Non-selected user clearing Cause No Destination out of order Class 1.3 service or option not available Class 1.4 service or option not implemented Class 1.5 invalid message e.g. parameter out of range Class 1.6 protocol error e.g. unknown message Cause No Message type non-existent or not implemented Cause No Invalid information element contentsCause No Timeout disconnect Recovery on timer expiration Cause No Protocol Error, unspecified Cause No SW56 disconnect Internetworking, unspecified Cause No Bearer service unavailable VN 4 onlyCause No Switch to conversation mode VN 4 only Class 1.7 interworking class Section Processing Functions SpecificationsGeneral Audio Performance Switching Matrix and ConferencingAudio Control Ports Isdn Telephone Line ConnectivityAnalog Telephone Line Connectivity Desktop Director Ports Euro Operation Mode Four-Column/Four-Hybrid Mode Specifications Page Telos Nx12 Limited Warranty Warranty and Application CautionPage A1 USA SPIDs by Telco Fort Mills Telephone Century TelephoneCincinnati Bell Nextlink/XO Standard Telephone GA Quest- See US West Rochester TelephoneSouthwestern Bell Sprint/Centel 102 A2 Telephone Terminology Guide Bit Error Rate Test-See Bert Calling Party Control- See CPC Circuit Switched Data- See CSD Appendix Extended Superframe. See ESF Interexchange Carrier- See IEC Listed Directory Number- See LDN Appendix Regional Bell Operating Company- See Rboc Superframe- See SF Guide to telephone terminology Appendix Protocols A3 USA Isdn Ordering GuideDealing with the Phone Company Details, Details CSD and CSV SPIDsDirectory Number DN IOC Capability Packages provisioning package Faxable Isdn Order Form for the USA & CanadaNT1s Terminals and Terminal Types Isdn BRI Line Order CO Values Protocol National ISDN-1 Protocol AT&T Point-to-Point Custom Multiple Subscriber Numbers MSN A4 Euro-ISDN Ordering GuideNames Line Deactivation Faxable Isdn Order Form for Euro ETS ETS-300 Euro-ISDN Telos Nx12