Telos NX12 user manual AES Mode, Channel default

detailed configuration & reference  53

combined mix of all callers’ audio, and require only one mix-minus feed from the console. All callers hear the one console mix-minus feed and each other.

The following table summarizes the effect of each mix-minus mode together with each Show mode:

	Mix-Minus Mode	Mix-Minus Mode	Mix-Minus Mode
	Separate	1 in/Multiple out	1 in/1 out
Show Mode
	2 in, 2 out, 1 POH	1 in, 2 out, 1 POH	1 in, 1 out, 1 POH
One-show	Use analog, AES, or LW.	Use analog, AES, or LW.	Use analog, AES, or LW.
	For AES, POH may be	For AES, POH may be	For AES, POH may be
	analog or AES.	analog or AES.	analog or AES.
Show Mode	4 in, 4 out, 1 POH	1 in, 4 out, 1 POH	1 in, 1 out, 1 POH
One-show, 4-column	Use AES in 4-channel	Use AES in 4-channel	Use analog, AES, or LW.
	mode or LW to access all	mode or LW to access all
	the inputs and outputs.	the outputs.	For AES, POH may be
	For AES, POH remains	With AES in 4-channel,	analog or AES.
	analog.	POH remains analog.
Show Mode	Per show: 2 in, 2 out, 1	Per Show: 1 in, 2 out, 1	Per show: 1 in, 1 out, 1
Two-show	POH	POH	POH
	Use AES in 4-channel	Use AES in 4-channel	Use analog, AES, or LW.
	mode or LW to access all	mode or LW to access all
	the outputs.	the outputs.	For AES, POH may be
	For AES, POH remains	For AES, POH remains	analog or AES.
	analog.	analog.

Livewire can always be used for any of the four caller and two POH inputs. When a Livewire input is enabled, the corresponding analog/AES input is disabled. Livewire can provide inputs 3 and 4 when they are not otherwise available at the XLR connectors.

Four caller audio outputs via Livewire are always possible, regardless of mode, in parallel and at the same time as the XLR audio outputs.

AES Mode

On the Web interface, the Setup Wizard can be used to set the AES mode.

If your Nx12 is equipped with the optional AES module, there are two AES input and two output XLRs, which may be configured as follows:

♦♦ 2-channel (default)

In this mode there are up to two caller inputs/outputs.

The two AES input XLRs can either take one audio input each using only the L chan- nels, or a combined L/R AES signal may be connected to the first AES input XLR.

The Nx12 will automatically sense if there is a second AES connection to XLR input 2. If present, the Nx12 will take the second audio input from this XLR. If not present, the Nx12 will take the second audio input from the R channel of AES input 1.

If your mixing console combines two caller sends into one AES L/R, plug this into the first AES input XLR and use the first AES output XLR for the caller audio. If your console uses two separate AES connections, use both XLR inputs and outputs.

Program on Hold is via the analog inputs.