Argent Terminal Adaptor - User Guide
Register | Description |
|
|
| allows multiple phone numbers on an ISDN service. |
S59 | ISDN connection status can only be read |
| ATS59? Returns 0 for connection not synchronised to Telstra network |
| ATS59? Returns 1 for connection ready for calls. |
S60 | B Channel Data Rate |
| ATS60=56 data rate set to 56kbps for international calls |
| ATS60=64 (default) data rate set to 64kbps calls within Australia |
S65 | Voice telephone number logged for an incoming voice call, can only be |
| read. |
| ATS65? |
S67 | Data telephone number logged for an incoming data call, can only be |
| read. |
| ATS67? |
S71 | Protocol on the data port |
| ATS71=1 (default) PPP (Internet) asynchronous to synchronous |
| conversion |
| ATS71=2 V.120 |
S75 | Answer call delay |
| ATS75=0 (default) no delay after answering a call |
| ATS75=1 Two second delay should be enabled for Windows NT. |
S92 | Subaddress |
| ATS92=n where n is a |
| the same phone number to only recognise calls with a matching |
| subaddress while they are all attached to the same ISDN line. |
5POTS TELEPHONE SUPPLEMENTARY FEATURES 5.1 Introduction
Supplementary services for ISDN control the switching of calls and how you manage calls. Forwarding an incoming call to another phone number is one example of controlling calls through the features of the POTS (Plain Old Telephone System) on the ATA interacting with the OnRamp® 2 service for voice calls. You require an analogue tone phone connected to the POTS port of the ATA to initiate the supplementary services.
Some supplementary services, such as MSN (Multiple Subscriber Number), can be set up with the use of the ‘AT’ commands described in section 4. This section describes the customer commands to control calls through the telephone port of the ATA.
These features provide the Telstra Easycall® functionality via the ATA on to OnRamp® 2 service. New features may be added from time to time and the Easycall® operation guide describes functionality of services. More information on the Easycall® features can currently found at the Telstra website (http://www.telstra.com.au) or from your Telstra Customer Service centre.
To simplify the instructions to operate each feature abbreviations are shown here for each step of the procedure. These abbreviations are used to describe the actions required from an analogue tone phone to initiate a supplementary service.
Version 1.1 | Telstra Corporation Limited |
Page 23/29 | ACN 051 775 556 |
