Rsp | Telstrat Argent guide

Argent Terminal Adaptor - User Guide

5.1.1Abbreviations used in the POTS feature descriptions

[...]	Square brackets indicate that the enclosed item is optional
DN	Destination number
DT	Dial Tone
OH	Off Hook
RH	Replace Handset when condition detected by ATA
RR	Recall signal from telephone
RSP	Network Responds with confirmation tone

Version 1.1	Telstra Corporation Limited
Page 24/29	ACN 051 775 556

Image 24

Telstrat Argent manual Rsp, Abbreviations used in the Pots feature descriptions

Contents

Version Copyright 1999 Telstra Corporation Limited Table of Contents 24 Serial Port ‘AT’ Commands Introduction Description 3.1 Application Package Contents Definitions Back Panel Port Functions Top Panel Seven Segment Display Display Interpretation ATA Activation Instructions Prepare positionConnect ATA to NT1 Connect the Eftpos terminal to ATA Power-up the ATA Adjust the Display Orientation of the ATASelect the Required TEI Number Observe D-Channel X.25 Call Progress For the First Call Observe for Configuration File Errors Observe the Software DownloadObserve for Failure to Connect Observe that the ATA is ready and record the service details Replace the ATA if Faulty on Arrival Point-to-Point Protocol PPP Installation Click on Control Panel Tick Don’t detect my modem I will select from list Installing Dial-Up Network Configuring Dial-Up Networking DUN Open Dial-Up Networking Double click on Make New Connection 17 V.120 Setup Connect the Eftpos terminalEnd to end test ATA Maintenance Warranty ATA out of Warranty with Telstra Service Assurance ‘AT’ Commands Introduction Register settings Register Description Pots Telephone Supplementary Features 5.1 Introduction Abbreviations used in the Pots feature descriptions RSP Telephone Port Pots Features Call Waiting CWMalicious Call Identification Mcid / MCT Call Line Presentation Clip Call Forward Multiple Subscriber Number MSN OH DT #1# telephone number # RH