Argent Terminal Adaptor - User Guide
5.2 Telephone Port (POTS) Features
5.2.1Call Waiting (CW)
Call Waiting is an Easycall ™ feature so the customer can detect the presence of another call, while a call is in progress.
a | Turn Call Waiting on: | OH DT * 43 # RSP RH |
b | Turn Call Waiting off: | OH DT # 43 # RSP RH |
c | Check if CW is enabled or disabled (double tone | OH DT *#43# RSP RH |
| indicates that CW is enabled; triple tone indicates |
|
| that CW is disabled) |
|
d | To release the current call and accept the waiting call | RH (Ring telephone) OH |
|
| or RR DT 1 |
e | To hold the current call and accept the waiting call | RR DT 2 |
f | To alternate between the two parties | RR DT 2 |
g | To release current call and connect to call on hold | RR DT 1 |
h | To reject the waiting call (Fend Off) | RR DT 0 |
5.2.2Malicious Call Identification (MCID / MCT)
Malicious Call Identification allows the customer to request the network to trace malicious calls on a call by call basis.
a | To set Malicious Call Trace during the call | RR DT * 39 | # [RH] |
b | To set Malicious Call Trace up to 60 seconds after | RR DT * 39 | # RH |
| the caller has released the port |
|
|
5.2.3Calling Line Identification Restriction (CLIR or Call Blocking)
Calling Line Identification Restriction, also called Call Blocking, is a service offered to the calling party to prevent presentation of the calling party's number. The phone number of the ATA can be restricted from being viewed at the remote end. In order for the ATA to present a phone number, it must be entered using the ‘AT’ Command (section 4.2).
a | To restrict presentation of CLI on a call by call basis | OH DT 1831 DN or |
| (Note 1) | OH DT ##31# RH |
b | To allow presentation of CLI on a call by call basis | OH DT 1832 DN or |
| (Note 1) | OH DT **31# RH |
c | Check if CLIR is enabled or disabled (double tone | OH DT **#31# RH |
| indicates that CLIR is enabled; triple tone indicates |
|
| that CLIR is disabled) |
|
Note 1: The dial number prefix (i.e. 1831 or 1832) is required for every call that the customer wishes to change (override) the network default status of CLIR.
Version 1.1 | Telstra Corporation Limited |
Page 25/29 | ACN 051 775 556 |
