Chapter 5: Lists 99
7305ENG.DOC CH 5 Lists, English Julie Hewlett Revised: 07/29/98 12:04 PM Printed: 05/19/99 8:59 AM Page
99 of 30
2. The Select( command and
two new list names are
entered from the Home
screen. - v " 9 accesses the list
signifier. - t accesses the
Text editor.
3. The left bound is chosen.
b
4. The right bound is chosen.
"(as necessary)
b
5. The plot is regraphed to
include only the selected
data points.
¨NEWT and ¨NEWD now exist in the calculators memory. To
display newly selected lists in the List editor, insert them as
you would insert any other list.
seq( seq( -
v
"
7 7
seq( returns a list in which each element is the result of the
evaluation of expression with regard to the variable. You also
must specify a value range from begin to end. You can specify
one optional argument, increment, which specifies the
interval between each variable value used to solve expression.
variable need not be defined in memory. increment can be
negative. The default value for increment is 1. seq( is not valid
within expressions.
seq(expression,variable,begin,end[,increment])
Left bound
Right bound