260 Chapter 13: Link and the CBLàCBR Application
APPS.DOC Chapter 13: Link and CBL/CBR Application, English Julie Hewlett Revised: 02/07/01 10:34 AM
Printed: 02/07/01 10:35 AM Page 260 of 22
• When you select 1:Rename, the Name= prompt is displayed,
and you can enter another appropriate variable name
using the - } menu (for example, renaming Pic1 to
Pic2 where Pic2 is undefined), or you can enter text using
the Text editor (- t) (for example, renaming L1 to
¨ABC where ¨ABC is undefined). When renaming lists, do
not enter the ¨ (- v OPS 9). The calculator assumes
that it is a list name. Press b to resume transmission.
Note: You cannot rename software applications or
constants (the 1:Rename option is excluded from the
DuplicateName menu).
• When you select 2:Overwrite, the sending unit’s data
overwrites the existing data stored on the receiving unit.
Transmission resumes.
• When you select 3:Omit, the sending unit does not send
the data in the duplicated variable name. Transmission
resumes with the next item.
• When you select 4:Quit, transmission stops, and the
receiving unit exits receive mode.
Transmission Error Conditions
A transmission error (Error in Xmit) occurs after one or two
seconds if:
• The unit-to-unit cable is not attached to the sending or
receiving unit. Note: If the cable is attached, push it in
firmly and try again.
• The receiving unit is not set to receive transmission.
• You attempt a backup between a TIN73 and a TIN82 or
TIN83.
• You attempt a data transfer from a TIN73 to a TIN82 with
data other than numerical lists, L1-L6, or without using
menu item 9:Vars to TI82.