258 Chapter 13: Link and the CBLàCBR Application
APPS.DOC Chapter 13: Link and CBL/CBR Application, English Julie Hewlett Revised: 02/07/01 10:34 AM
Printed: 02/07/01 10:35 AM Page 258 of 22
To set up the TIN73 to receive data, follow these steps:
1. Press
9 to display the APPLICATIONS menu.
2. Select
1:Link and press " to display the Link RECEIVE
menu.
3. Select
1:Receive. The message Waiting… and the busy
indicator are displayed. The receiving unit is ready to
receive transmitted items.
To exit the receive mode without receiving items, press
^, and then select 1:Quit from the Error in Xmit menu.
When transmission is complete, the unit is still in the
receive mode. Press - l to exit the receive mode.
Transmitting Data Items
To transmit data items from a TIN73, follow these steps:
1. Select items to send on the sending unit. Keep the SELECT
screen displayed on the sending unit (see page 257).
2. Set the receiving unit to receive mode (see page 257).
3. Press
" on the TIN73 to display the TRANSMIT menu.
4. Confirm that
Waiting… is displayed on the receiving unit,
which indicates it is set to receive.
5. Select
1:Transmit. The name and type of each data item are
displayed line by line on the sending unit as the item is
queued for transmission, and then on the receiving unit as
each item is accepted.
6. After all selected items have been transmitted, the
message Done is displayed on both calculators. Press $
and # to scroll through the names.
To stop a transmission, press ^. The Error in Xmit menu is
displayed on both units. To leave the error menu, select 1:Quit.