Chapter 11: Trigonometry 211
7311ENG.DOC CH 11 Trigonometry, English Julie Hewlett Revised: 05/26/98 11:12 AM Printed: 05/19/99 9:02
AM Page 211 of 12
Hint: This chapters section entitled Graphing Trig
Functions contains an example which graphs and traces
Y1=tan(X) to show undefined Y values for the function.
Inverse Trig Functions Inverse Trig Functions -
u
2, 4, and 6 2, 4, and 6
The inverse trig functions calculate the smallest angle that
gives a particular sine, cosine, or tangent. For example, sin-1(.5)
calculates the angle whose sine is .5.
sin-1(value)
cos-1(value)
tan-1(value)
For cos-1 (also called arccosine) and sin-1 (also called arcsine),
M1value1.
All inverse trig functions return the arcsine, arccosine, or
arctangent of value or of each element in a list. If value is a
list, the calculator calculates the inverse trig function of each
element in the list, and a list is returned.
Angle Mode SettingsAngle Mode Settings
In trig calculations, angles are interpreted as degrees ( ¡ ) or
radians ( r ), depending on the Angle mode setting, Degree or
Radian.
Set the Angle mode from the mode screen.
.
Depending on the Angle mode, sin(1) is the sine of either 1¡ or
1r. As you can see in the following illustration, 1¡ is not the
same as 1r. Therefore, sin(1¡) sin(1r ). For correct results,
enter angle values in the same units (degrees or radians) as the
Angle mode setting.