Texas Instruments TMS320DM357 DVEVM v2.05 Audio In P3, Audio Out P5, Setting Up the Hardware

Setting Up the Hardware

1)On the S3 mini-dip switch, verify that positions 1 through 4 are configured to boot from on-board NAND as in the following figure, where the black rectangle is the switch location.

1

2

3

4

5

6

7

8

9

10

Also on the S3 mini-dip switch, verify that position 10 selects the correct video format—NTSC or PAL. The following diagram shows the switch in the NTSC setting.

2)Connect an audio speaker to Stereo Line Out (P5) and an audio source to Stereo Line In (P3).

Audio In (P3) Audio Out (P5)

EVM Hardware Setup 2-3