Running the Standalone Demos
3.3Running the Standalone Demos
1)Press "Play" or "OK" on the remote to move from the remote control diagram to the main menu screen, which looks like this:
The Encode + Decode demo allows you to record and playback video. The Encode demo records audio/speech and video in the formats you select. The Decode demo plays audio/speech and video files you select.
2)Use the up and down arrows to change which demo is selected. Then, press "OK" or "Play" to move to the selected demo.
3)Within a demo, you start at the settings screen, where you see the controls you can use to run the demo at the bottom of the screen and the current settings in the
4)Use the up and down arrows to move to a setting you want to change.
5)Use the left and right arrows to cycle through the options until the setting you want is shown.
6)Press "Play" to begin the Encode+Decode and Decode demos. Press "Rec" (record) twice to begin the Encode demo.
7)While the demo runs, data about the settings, processor load, and rates are shown. Static settings are on the right. Dynamic data reporting is on the left.
Running the Demonstration Software |
