Reset to Factory Default Settings
From the System menu, choose the Factory Default item and the Reset to Factory Default screen appears. Press Apply to reset the M3800 to factory default settings. Press Cancel to go back to the main menu.
WARNING | Resetting to factory defaults will not erase the data stored in the hard disks, but |
WILL revert all the settings to the factory default values. |
Upgrading System Firmware
From the System menu, choose the
Firmware Upgrade item and the
Firmware Upgrade screen appears.
Follow the steps below to upgrade your firmware:
1.Use the Browse button to find the firmware file.
2.Press Apply.
3.The beeper beeps and the Busy LED blinks until the upgrade is complete.
NOTE
WARNING
•The beeper only beeps if it is enabled in the System Notification menu.
•Check Thecus website for the latest firmware release and release notes.
•Downgrading firmware is not permitted.
Do NOT turn off the system during the firmware upgrade process. This will lead to a catastrophic result that may render the system inoperable.
45
