Chapter 7: Tips and Tricks
USB and eSATA Storage Expansion
The M3800 supports external USB hard disks through its three USB ports. Once a USB hard disk has successfully mounted, the entire volume will be copied automatically to the default USB HDD folder. The M3800 supports up to 6 USB external storage devices. All file names on the USB disk volume are case sensitive.
The M3800 also supports eSATA hard disks with its eSATA port.
Before attaching an eSATA or USB disk drive to M3800, you have to partition and format it on a desktop computer or a notebook first. The attached device will be
located at \\192.168.1.100\usbhdd\sdf1 where 192.168.1.100 means the IP address of M3800 and sdf1 stands for the first partition on disk #6, the eSATA or USB disk drive. If it is an NTFS partition, NAS users can open or copy files from \\192.168.1.100\usbhdd\sdf1 but cannot add new files or modify existing files.
NOTE
If you want to write to an USB storage device, the file system must be FAT32.
USB Storage | FAT32 Partition | NTFS Partition |
Read | OK | OK |
Write | OK | - |
Adding a Spare Disk
With a RAID 1 array, you can add a spare disk after the initial RAID is setup. To add a spare disk, follow the steps below:
1.On the RAID Configuration Screen, tick the checkbox of the hard disk you wish to designate as a spare disk.
2.Click Add Spare.
Once the disk is set as a spare disk, it will automatically rebuild the previous RAID set when one of the disks becomes degraded.
Remote Administration
You can set up your M3800 for remote administration. With remote administration, you can access your M3800 over the Internet, even if your M3800 is behind a router. This is especially useful if you are traveling and suddenly need a file from your M3800.
Setting up remote administration is a
•Thecus M3800 NAS device
•Cable/DSL Router with Dynamic DNS support
•Home PC
•Internet Connection
NOTE
Router setup will differ slightly depending on router used. For this example, we will use the Asus WL500g because it has support for Dynamic DNS. Contact your router hardware vendor for setup help.
86
