Thermo Products CMA2-75N, CMA1-50N B. Base Installation, Combustible Floor Base Model: 70 BASE

All installations and services must be performed by qualified service personnel.

B. BASE INSTALLATION

1. Combustible Floor Base Model: 70 BASE

Use the base bottom panel as a template to mark floor opening locations (see Figure 2). Cut a square opening in the floor for the supply air connector duct. Cut the opening 1-inch larger than the square template opening. (duct requires 1-inch clearance to combustible floor).

Figure 2.

Figure 3.

After cutting openings in the floor, place the bottom panel in position. Mark the square opening location on the distribution duct at the connection point of the

12