2.4Connecting up your digital receiver 15
Toconnect the audio connectors
Youwill need to obtain an audio cable (RCA
cable)to connect the audio connectors. Plug
one ends of the cable into the AUDIO L
(white) and AUDIO R (red) sockets on the
digital receiver,and the other ends into the
matching sockets on your television or au-
diosystem.
To enjoy Dolby digital audio, your televi-
sionor audio system must be able to decode
Dolbydigital audio, and you will need to ob-
taina S/PDIF cable. Plug one end of the ca-
ble into the S/PIDF socket on the digital re-
ceiver,and the other end into the matching
socketon your audio system.
2.4.3 Connectingto your video cassette recorder
Thedigital receiver also can output video to another appliance
such as video cassette recorder or video receiver throughan
auxiliarySCART connector.
You will need to obtain a SCART cable to
use the auxiliary SCART connector. Plug
one end of the cable into the VCR socket on
the digital receiver, and the other end into
the matching socket on your video cassette
recorderor suchlike.
2.4.4 Insertingbatteries in the remote control
Toinsert the batteries, open the battery compartment by re-
movingthe lid, and then insert the batteries observing the po-
larity, which is marked on the base of the battery compart-
ment.