32 ServiceSearch
Touse USALS, select the Instal-
lation>USALS Settingmenu.
At first you have to set the Mo-
torized DiSEqC 1.3 option to
Enable.
Tocalculate every satellite position, perform the following steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Select the tuner that is connected to the motorized an-
tennaat the Tuner Select option.
3. Inputyour location to the My Longitude and My Latitude
optionswith the
V−,
V+andnumeric buttons.
4. Input the position of your selected satellite to the Satel-
liteAngle if it is not correct.
5. Select the Goto the position option. Then the antenna
will turn toward your selected satellite calculating its
position.
6. If the receiving quality, which is displayed on the right
bottomon the screen, is not good, then tune the antenna
finelywith the options of the Move menu. The changed
positionis automatically saved at one. At this time you
had better check the receiving quality of every trans-
ponder and choose the best one at the Transponder(or
Frequency)option. It will be helpful to your fine tuning.