3.5Adjusting the on-screen display 25
To change the number,select the Change PIN Code menu;
then an input box appears. You have to enter a desired num-
bertwice for confirmation.
Youcan also restrict uses of some menus. Selecting the Access
Controlmenu displays a list of menus that you can lock. Ifthe
Time Setting item is set to Locked, you have to enter the per-
sonal identification number to access the Time Setting menu.
If you enter a wrong number,you cannot use the menu. To
releasea shut item, set it to Unlocked.
3.5 Adjusting the on-screen display
Youcan adjust the transparency level of the on-screen display.
Selectthe System Setting menu and set the OSD Transparency
optionas you desire. Itsavailable range is 0 to 50 percent.
Youcan adjust the display time of the information box. Refer
theinformation box to § 5.2.2. Toadjust its display time, select
the System Setting menu and set the Info Box Display Time
option as you desire. Its available range is 1 to 30 seconds. If
youset this option to No Info Box, the information box will not
displayed when you switch services. However, pressing the
buttondisplays the information box. If you set this option
toNever Hide, the information box will always be displayed.
Youcan raise or lower the position of the information box. Se-
lect the System Setting menu, and then set the Info Box Posi-
tionoption as you desire. Itsavailable range is −10 to +3 line.
The morehigh the value is set, the more low the information
boxwill be positioned.
3.6 Touse the time shift feature
You can use the time shift featurewith this digital receiver.
Time shift means that the most recent hour of the television
serviceyou are watching is saved on the hard disk of the dig-
ital receiver. To enable this feature, select the System Setting