34 ServiceSearch
4. Inputthe symbol rate of your desired transponder to the
SymbolRate option with the numeric buttons.
5. Setthe Polarization option to the polarization of your de-
siredtransponder.
NOTE
You could get the transponder information from a satellite
magazine or web site such as http://www.satcodx.com or
http://www.lyngsat.com.
Tosearch one service of a transponder, perform the following
steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Modeoption to Advanced.
3. Choose your desired transponder at the Frequency op-
tionor input it with the numeric buttons.
4. Inputthe symbol rate of your desired transponder to the
SymbolRate option with the numeric buttons.
5. Setthe Polarization option to the polarization of your de-
siredtransponder.
6. Specifythe PIDs of your desired service at the PID menu
withthe numeric buttons. PID(Packet Identifier) is a set
ofnumbers that identifies transport stream packets.
Tosearch every service of a SMATV transponder, if the digi-
tal receiver is connected to a SMATV,perform the following
steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Modeoption to SMATV.
3. Choose your desired transponder at the Frequency op-
tionor input it with the numeric buttons.